Filter
Top Products
Using Your Recovery CDs
59
Using the System Recovery CD(s)
Your system may take a few minutes to load necessary files. A blue screen
appears during the downloading process.
1 Insert the Sony System Recovery CD in the optical drive. The System
Recovery utility starts from the optical drive. The first CD must be in the
drive when you turn on the notebook.
2 Shut down your notebook as described in the “Shutting Down Your
Notebook” section on page 33.
3 Wait 30 seconds and turn on your notebook.
4 The VAIO System Recovery Utility dialog box appears. Click Next.
5 At the pop-up prompt, select Yes to begin the system recovery process.
6 Follow the on-screen instructions.
If your notebook does not start from the Recovery CD
1 Press the power button and hold it for more than 4 seconds to turn off the
notebook.
2 Turn on the notebook. When the Sony logo is displayed, press the F2 key.
The BIOS setup menu screen appears.
3 Press the arrow keys to select the Exit menu.
4 Press the arrow keys to select “Get Default Values” and then press the Enter
key. The message “Load default configuration now?” appears.
5 Make sure “Yes” is selected, then press the Enter key.
6 Press the arrow keys to select “Exit” (Save Changes) and then press the
Enter key. The message “Save configuration changes and exit now?”
appears.