Filter
Top Products
Troubleshooting the Mouse and Touchpad
67
6 Press the Enter key.
❑ Restart the notebook to activate the touchpad again.
❑ If your touchpad is interpreting a single tap as a double-click, adjust the
button assignments. Follow these steps:
1 (Windows XP) Press the Windows key and use the arrow keys to select
All Programs. Press the Enter key. (Windows 2000) Press the Windows
key and use the arrow keys to select Settings. Press the Enter key.
2 (Windows XP) Select Sony Notebook Setup, and press the Enter key.
Select Sony Notebook Setup again. (Windows 2000) Select Control
Panel, and then press the Enter key.
3 (Windows XP) Select the Touchpad tab and press the Alt+S keys
simultaneously. (Windows 2000) Select Mouse, and then press the Enter
key. The Mouse Properties dialog box appears.
4 Make sure the Buttons tab is open, and change the button assignments in
the Mouse Properties dialog box. Press the Enter key to save your
changes and close the dialog box.
❑ If you are still experiencing problems, make sure another mouse was not
installed.
❑ You may need to use your Driver Recovery CD to reinstall the mouse
drivers. See “To use the Driver Recovery CD(s)” on page 55 for more
information.
The pointer does not move when I use the Touchpad or
Mouse.
❑ The notebook should be restarted. Follow these steps:
1 Press the Windows key.
2 Press the “U” key, and wait for at least 4 seconds.
3 Press the “R” key to restart the notebook.
❑ (Windows XP) If the notebook does not restart, press the Ctrl+Alt+Delete
keys simultaneously. In the Windows Task Manager dialog box, click the
Shut Down menu, and select Restart. (Windows 2000) If the notebook does
not restart, press Ctrl+Alt+Delete simultaneously and click Shut Down on
the Windows Security window.