Filter
Top Products
Hardware Guide
Upgrading your VAIO computer
51
nN
5 To insert a new memory module, remove it from its anti-static package, handling it only by the edges.
6 Locate the notch on the bottom edge of the memory module.
7 Align the memory module over the slot, making sure the module is facing the correct way.
8 Press evenly against the memory module's upper corners. The end latches snap into position
automatically.
9 Reinstall any add-on cards or components you removed.
10 Replace the cover as described in Closing the unit (page 52).
✍ There is only one correct way to insert the memory module. Make sure the rivet of the module is lined up with the connector.
! Use only the memory modules specified on the printed Specifications sheet.
! To avoid damaging a memory module or the memory module slot, move the side latches slightly outward to relieve pressure. The
module is properly inserted when the side latches click into place.
Viewing the amount of memory
To view the amount of memory, proceed as follows:
1 Turn on the computer.
2 Click the Start button, point to All Programs, then VAIO System Information, and click VAIO
System Information again.
You can view the amount of installed memory here.