Filter
Top Products
Sony VAIO Desktop User Guide
Getting help
64
nN
My connected printer does not print after the computer resumes from a power saving mode
To reset the printer connection, proceed as follows:
1 Right-click the My Computer icon on the desktop, then select Properties.
2 Click the Device Manager tab.
3 Select Refresh, then click OK.
The printer should now function properly.
My i.LINK™ device does not appear on the desktop
To see the i.LINK
™
device icon on the desktop, proceed as follows:
1 Turn off and disconnect your i.LINK
™
device.
2 Reconnect your device.
3 Turn on the power on the device again.
The icon should now appear on the desktop.
The connected i.LINK™ device is not recognized
Disconnect the i.LINK
™
device, then connect it again.
You are strongly advised to use only Sony i.LINK
™
cables, as using other brands may cause problems with
the i.LINK
™
devices.
When I remove a Memory Stick™, an error message appears
Insert the Memory Stick
™
into the slot again and press <Enter>. Wait until the active application finishes,
then remove the Memory Stick
™
. If the message confirms the ejection of the Memory Stick
™
, click OK.