Filter
Top Products
16
Getting Started
Removing the supplied stylus
The supplied stylus is stored on the top left side of the
Reader. Pull it out from the top to use it.
Note
Make sure to insert the stylus fully to the bottom of the holder
when you replace it.
Attaching the soft cover
Note
If the wireless switch of the Reader is turned off, the soft cover
can be reattached to provide protection for the display.
If the wireless switch of the Reader is turned on, the PRSA-
ZC9 supplied cover must be used to meet radio frequency
exposure compliance.
Insert the lowest hook of the cover into the lowest
hole of the cover.
Slide the soft cover to the upper.
Push along the edge of the cover to attach the
center hole.
Push along the edge of the cover to attach the
uppermost hole.
Continued