Filter
Top Products
12. Appendix E
SONY AIT-3Ex drive SDX-800V series Ver.1.1
12-12
Note: It is intended that this field provide a unique vendor identification of the vendor who wrote the Host Common
attributes. In the absence of a formal registration procedure, T10 maintains a list of vendor identification codes in use.
Vendors are requested to voluntarily submit their identification codes to T10 to prevent duplication of codes.
APPLICATION NAME: Contains the name of the application client.
APPLICATION VERSION contains the version of the application client.
USER MEDIUM TEXT LABEL: Is the user level identifier for the medium.
DATE & TIME LAST WRITTEN: Contains when the application client last wrote to the MAM. The format for the string
is YYYYMMDDHHMM using a 24-hour time format
Note: The application must update the “Date and Time Last Written” field any time the host attributes contents are
modified.
TEXT LOCALISATION IDENTIFIER: Defines the character set used for attributes with a text format (table 12-14).
Table 12-14: TEXT LOCALISATION IDENTIFIER
00h No code specified (ASCII)
01h ISO/IEC 8859-1 (Europe, Latin America)
02h ISO/IEC 8859-2 (Eastern Europe)
03h ISO/IEC 8859-3 (SE Europe/miscellaneous)
04h ISO/IEC 8859-4 (Scandinavia/Baltic)
05h ISO/IEC 8859-5 (Cyrillic)
06h ISO/IEC 8859-6 (Arabic)
07h ISO/IEC 8859-7 (Greek)
08h ISO/IEC 8859-8 (Hebrew)
09h ISO/IEC 8859-9 (Latin 5)
0Ah ISO/IEC 8859-10 (Latin 6)
0Bh – 7Fh Reserved
80h ISO/IEC 10646 (UCS-2BE)
81h ISO/IEC 10646–1 (UTF-8)
82h – FFH Reserved
BARCODE: Is the contents of a barcode associated with the medium in the MAM.
OWNING HOST TEXTUAL NAME: Indicates the host from which that USER MEDIUM TEXT LABEL originates.
MEDIA POOL: Indicates the media pool to which this medium belongs.
PARTITION USER TEXT LABEL: Is a user level identifier for the partition specified by the PARTITION NUMBER
field in the CDB.
LOAD/UNLOAD AT PARTITION: Indicates whether the media can be loaded or unloaded at the Partition specified
by the PARTITION NUMBER field in the CDB. If loads and unloads are enabled for the specified partition, the value
of this parameter shall be one. If loads/unloads are not enabled for the specified partition, the value of this parameter
shall be zero. All other attribute values are reserved. If LOAD/UNLOAD AT PARTITION is disabled, then loads and
unloads are performed at the beginning of the media instead of at the specified partition. If this attribute is in the
nonexistent state then the default action will be to load/unload at the beginning of media
Note:
The 0809h Partition User Text label and 080Ah Load/Unload at Partition Host attributes are optional. Supported, if
the ISV supports multi partitions.