Sony SDX-800V Computer Drive User Manual


 
SDX-800V series Ver.1.1 Table of Contents
5. SCSI Interface
5.1. Introduction 5- 1
5.1.1. Overview of the SCSI Interface 5- 1
5.1.2. Supported Messages 5- 1
5.1.3. Supported Commands 5- 2
5.2. SCSI BUS Operation 5- 3
5.2.1. Typical SCSI Operation 5- 3
5.2.2. Disconnect 5- 3
5.3. Message Specification 5- 4
5.3.1. COMMAND COMPLETE (00h) 5- 5
5.3.2. EXTENDED MESSAGE (01h) 5- 5
5.3.2.1. PARALLEL PROTOCOL REQUEST (04h) 5- 5
5.3.2.2. SYNCHRONOUS DATA TRANSFER REQUEST (01h) 5- 6
5.3.2.3. WIDE DATA TRANSFER REQUEST 5- 8
5.3.3. SAVE DATA POINTER (02h) 5- 9
5.3.4. RESTORE POINTERS (03h) 5- 9
5.3.5. DISCONNECT (04h) 5- 9
5.3.6. INITIATOR DETECTED ERROR (05h) 5- 10
5.3.7. ABORT (06h) 5- 10
5.3.8. MESSAGE REJECT (07h) 5- 10
5.3.9. NO OPERATION (08h) 5- 10
5.3.10. MESSAGE PARITY ERROR (09h) 5- 10
5.3.11. BUS DEVICE RESET (0Ch) 5- 11
5.3.12. IDENTIFY (80h-FFh) 5- 11
5.3.13. IGNORE WIDE RESIDUE (23h) 5- 11
5.4. Status Specification 5- 12
6. Command Specification
6.1. ERASE 19h 6- 2
6.2. INQUIRY 12h 6- 3
6.3. LOAD/UNLOAD 1Bh 6- 8
6.4. LOCATE 2Bh 6- 10
6.5. LOG SELECT 4Ch 6- 11
6.6. LOG SENSE 4Dh 6- 13
6.6.1. The Log Page Descriptor 6- 14
6.6.2. The Log Parameter Descriptor 6- 15
6.6.3. Supported Log Pages 6- 16
6.6.3.1. Summary List of Supported Pages 6- 17
6.6.4. Write and Read Error Counters Pages 6- 17
6.6.5. Last N Error Events List 6- 18
6.6.6. Tape Alert Log Page 6- 19
6.6.7. Tape Log Page (Sony Unique) 6- 24
6.6.8. Tape Capacity Log Page (Sony Unique) 6- 25
6.6.9. Drive Usage Log Page (Sony Unique) 6- 26
6.6.10. Read and Write Frame Error Counter Page 6- 27
6.6.11 Data Compression Transfer Log Page (Sony Unique) 6- 29