Filter
Top Products
LOG SENSE 6.Command Specification
SONY AIT-3Ex drive SDX-800V series Ver.1.1 6-23
Code Flag Type Flag Type Recommended application client message Probable cause
2Bh Loader Door O C The operation has failed because the autoloader
door is open:
1. Clear any obstructions from the autoloader
door.
2. Eject the magazine and then insert it again.
3. If the fault does not clear, turn the autoloader
off and then on again
4. If the problem persists, call the tape drive
supplier helpline.
Tape changer door
open
2Ch Loader
Hardware C
O C The autoloader has a hardware fault:
1. Turn the autoloader off and then on again.
2. Restart the operation.
3. If the problem persists, call the tape drive
supplier helpline.
Check the autoloader users manual for device
specific instructions on turning the device power
on and off.
The loader mechanism
has a hardware fault
that is not mechanically
related.
2Dh Loader
Magazine
O C The autoloader cannot operate without the
magazine.
1. Insert the magazine into the autoloader
2. Restart the operation.
Loader magazine not
present
2Eh Loader
Predictive
Failure
O W A hardware failure of the changer mechanism is
predicted.
Call the tape drive supplier helpline.
Predictive failure of
loader mechanism
hardware
32h Lost
Statistics
O W Media statistics have been lost at some time in
the past
Drive or library powered
down with tape loaded
33h Tape
directory
invalid at
unload
O W The tape directory on the tape cartridge just
unloaded has been corrupted.
File search performance will be degraded
The tape directory can be rebuilt by reading all the
data.
Error prevented the tape
directory being updated
on unload.
36h No start of
data
O C The start of data could not be found on the tape:
1. Check you are using the correct format tape
2. Discard the tape or return the tape to your
supplier
Tape damaged, bulk
erased, or incorrect
format