Filter
Top Products
GB
34 The INSTALL SETTING Menu
The INSTALL
SETTING Menu
The INSTALL SETTING menu is used for
changing the settings of the projector.
Tilt...
Adjusts the position (height) of the projected
picture. Pressing the f on the TILT
adjustment key or M/, key on the Remote
Commander, the more the projector tilts and
the higher the position of the picture.
Pressing the F on the TILT adjustment key
or m/< key on the Remote Commander,
the less the projector tilts and the lower the
position of the picture.
V Keystone
Corrects the trapezoidal distortion caused by
the projection angle. Select “Auto” for
automatic correction, or “Manual” for
manual correction using the < or , key.
When the bottom of the trapezoid is
longer than the top : Sets a lower
value.
When the top of the trapezoid is longer
than the bottom : Sets a higher
value.
The auto V Keystone adjustment may not
correct the trapezoidal distortion perfectly,
depending on the room temperature or the
screen angle.
Image Flip
Flips the image on the screen horizontally
and/or vertically.
Off: The image does not flip.
HV: Flips the image horizontally and
vertically.
H: Flips the image horizontally.
V: Flips the image vertically.
When the Image Flip is set to “HV” or “V”,
the Lamp Mode works with “Low” setting.
Background
Select the background color of the screen
when no signal is input to the projector.
Select black or blue.
Normally set to “blue.”
Lamp Mode
Sets the lamp brightness in the projection.
High: Illuminates the projected image
brightly.
Low: Reduces fan noise and power
consumption. The brightness of the
projected image will be lower compared
with the “High” setting.
Menu Items
Note
Tilt...
V Keystone: Auto
Image Flip: Off
Background: Blue
Lamp Mode: Low
INSTALL SETTING
Input A
Note