Filter
Top Products
47
GB
Specifications
Other
• Whan a signal other than the preset signals shown above is input, the picture may not
appear properly.
• Memory No. 22 and 34 show the interlace signal.
• When a SXGA+ signal is input, the image may extend beyond the screen. In this case,
input a signal with no black edges around the image, and disconnect and reconnect the
cable or select the input signal by pressing INPUT key.
Warning on power connection
Use the supplied power cord when you use the projector in your country.
Otherwise, use a proper power cord meeting the following specification.
34* 1280 × 1024 SXGA VESA 43 Hz 46.433 86.872 H-pos, V-pos 1696
35 SGI-5 53.316 50.062 S on G 1680
36 SXGA VESA 60 Hz 63.974 60.013 H-pos, V-pos 1696
37 SXGA VESA 75 Hz 79.976 75.025 H-pos, V-pos 1688
38 SXGA VESA 85 Hz 91.146 85.024 H-pos, V-pos 1296
52 1400 × 1050 SXGA+ 60 Hz 63.981 60.020 H-pos, V-pos 1685
Memory No. 1 to No. 26 (VPL-CS5)
Memory No. 1 to No. 38, No. 52 (VPL-CX5)
Notes
The United
States,
Canada
Continental
Europe,
Korrea
UK Australia Japan
Plug type YP-11 YP-21 SP-61 B8 YP-13
Female end YC-13L YC-13L YC-13L C7-2 YC-13L
Cord type SPT-2 H03VVH2-F H03VVH2-F H03VVH2-F VCTFK
Rated Voltage & Current 10A/125V 2.5A/250V 2.5A/250V 2.5A/250V 7A/125V
Safety approval UL/CSA VDE BS SAA DENAN
Cord length (max.) 4.5 m _ _ _ _
Memory
No.
Preset signal fH (kHz) fV (Hz) Sync SIZE