Filter
Top Products
15
Connecting the Projector
Projecting the Picture
appear properly. Set your computer to output
the signal to only the external monitor.
For details, refer to the operating
instructions supplied with your computer.
To connect a Macintosh computer equipped
with a video output connector of a type having
two rows of pins, use a commercially available
plug adaptor.
USB function
When connecting the projector to a
computer using the USB cable for the first
time, the computer recognizes the
USB
hu
man interface device (wireless mouse
function) automatically.
Recommended operating
environment
When you use the USB function, connect the
USB cable as illustrated. The USB function
can be used on a computer loaded with
Windows 98, Windows 98 SE,
Windows ME, Windows 2000, or
Windows XP (preinstalled models.)
• Your computer may not start correctly when
connected to the projector via the USB cable.
In this case, disconnect the USB cable,
restart the computer, then connect the
computer to the projector using the USB
cable.
• This projector is not guaranteed for suspend
or standby mode. When you use the projector
in suspend, or standby mode, disconnect the
projector from the USB port on the computer.
• Operations are not guaranteed for all the
recommended computer environments.
• When you connect a USB-capable
Macintosh computer to the projector using
the USB cable, wireless mouse functions
become available.
•A
“Memory Stick” inserted into the
“Memory Stick” slot on the projector cannot
be accessed from the Projector Station for
Presentation (VPL-CX86 only).
This section describes how to connect the
projector to a VCR.
For more information, refer to the
instruction manuals of the equipment you
are connecting.
To connect to a video or S video
output connector
A Stereo audio connecting cable (not supplied)
(Use a no-resistance cable.)
B Video cable (not supplied) or S-Video cable
(not supplied)
Note
Notes
Connecting a VCR
VCR
to S
video
output
Right side
to audio
output
(R)
to video
output
to audio
output (L)