Filter
Top Products
23
Other Functions
Convenient Functions
Other Functions
You can switch the following functions of
the Intelligent Auto-setup to manual
adjustments using the menu.
• V Keystone correction (correction of
trapezoidal distortion)
Set “V Keystone” in the INSTALL
SETTING menu to “Manual.”
• Smart APA (Auto Pixel Alignment)
Set “Smart APA” in the SET SETTING
menu to “Off.”
• Auto Input Search
Set “Auto Input Search” in the SET
SETTING menu to “Off.”
For details on the menu operations, see
“Using a MENU” on page 25.
When you connect a computer to the
projector using the USB cable, you can
control the mouse of the computer using the
Remote Commander.
The R/L CLICK keys and joystick function
as follows.
For details, see “To connect a computer” on
page 14.
Make sure that nothing obstructs the infrared
beam between the Remote Commander and the
remote control detector on the projector.
When you are using the Air Shot to project
the picture from a computer, you can
perform some operations for a slide show
using the supplied presentation tool. The
following keys on the presentation tool are
usable.
* Also available when you are not using the
Air Shot.
• If there is any obstruction between the
presentation tool and the remote control
detector on the projector, the presentation
tool may not function properly.
• A black screen may not be displayed even if
you press the “B” key depending on the
operating system (OS) of the language of
your computer.
If you are leaving the conference room
immediately, turn the projector off, and then,
after the lens protector closes and the
powered tilt adjuster is retracted into the
projector, you can unplug the AC power
cord. After the AC power cord is unplugged,
the fan runs for a certain time automatically.
• When unplugging the AC power cord, ensure
that the lens protector has closed and the
powered tilt adjuster has been retracted into
the projector. Moving the projector with the
Switching from the Intelligent
Auto-setup Function to
Manual Adjustments
Controlling the Computer
Using the Supplied Remote
Commander (When Using the
USB Cable)
Key and joystick Function
R CLICK (front) Right button
L CLICK (rear) Left button
Joystick Corresponds to the
movements of the
mouse
Note
Controlling the Computer
Using the Supplied
Presentation Tool (When
Using the Air Shot) (VPL-CX86
only)
Key Function
LASER Emits a laser beam.
*
G SLIDE g Changes the slides in
the forward/backward
direction.
B Displays/cancels a
black screen during the
slide show.
Notes
Off & Go Function
Notes