Filter
Top Products
19
GB
Connecting the Projector
Setting Up and Projecting
To connect an IBM PC/AT compatible computer
When you use a wireless mouse
On the USB function
When connecting the projector to a computer by using the USB cable for the
first time, the computer recognizes the following devices automatically.
USB human interface device (wireless mouse function)
Recommended operating environment
When you use the USB function, connect your computer as illustrated above.
The USB mouse function can be used on a computer that came with Windows
98, Windows 98 SE, Windows ME, Windows 2000 or Windows XP
preinstalled models.
• Your computer may not start correctly when connected to the projector via the USB
cable. In this case, disconnect the USB cable, restart the computer, then connect the
computer to the projector using the USB cable.
• This projector is not guaranteed for suspend, standby mode. When you use the
projector in suspend, standby mode, disconnect the projector from the USB port on
the computer.
• Operations are not guaranteed for all the recommended computer environments.
Notes
INPUT D OUTPUT
INPUT A INPUT B INPUT C
ETHER
(PLUS IN POWER)
(MONO)
LR
RS-232C IN S VIDEO VIDEO AUDIO
RGB AUDIO RGB DVI-D
R/R-Y/Pn G/Y B/B-Y/Ps SYNC/HD VD AUDIO MONITOR AUDIO
AUDIO
CONTROL
REMOTE VIDEO IN
CONTROL S
to USB connector
Right side
USB cable (supplied)
(Connect the USB cable to use a
wireless mouse.)
to monitor output
Computer
HD D-sub 15-pin cable (supplied)
to audio output
a) Use a no-resistance cable.
b) Connect a DVI cable to use a DVI equipment.
DVI cable (not
supplied)
b)
To DVI-D
output
Stereo audio connecting cable (not supplied)
a)