Sony VPL-PX40 Projector User Manual


 
27
GB
Projecting
Setting Up and Projecting
Next, the screen for entering the new password is displayed. (Enter the
password at this screen even if you want to keep the current password.)
3 Enter the password again to confirm.
If the password is entered incorrectly, the menu screen displays an
Invalid
Password
message.
4 The security lock is completed.
You will not be able to use the projector if you forget your password and the password
administrator is not available. Be please aware that using the security lock can prevent
valid usage in such cases. It is recommended that you make a note of the selected
password.
Once the security lock is set and the main power is turned off, the screen for entering
the password is displayed when the power is turned on the next time. Enter the
password that was set. If you fail to enter the correct password after three tries, the
projector cannot be used. In this case, press the I / 1 key to turn off the power.
The security lock will not be set if the correct password is not entered in steps 2 and
3, or a key other than the MENU, arrow keys, and ENTER key is pressed.
If you call the customer service center because you have forgotten the password, you
will need to be able to verify the projector’s serial number and your identity. (This
process may differ in other countries.) Once your identity has been confirmed, we
will provide you with the password.
Notes
Enter password key
Use: Cancel: Other key
V Keystone: 0
Image Flip: Off
Background: Blue
Lamp Mode: Standard
Direct Power On: Off
High Altitude Mode
: Off
Security Lock: Off
INSTALL SETTING
Input A
Invalid Password!
X