Sony VPL-PX40 Projector User Manual


 
51
GB
Specifications
Other
* Digital input is supported for the signals marked with an asterisk. Those signals from No. 6 to No.
39 that are not marked with an asterisk are automatically output in accordance with the projector
specifications.
Memory numbers 22 and 34 are interlace signals.
When an SXGA+ signal is input, the image may extend beyond the edge of the
screen. In this event, input a signal in which the image is not surrounded by a black
area, and then unplug and then plug back in the connecting cable, or else press the
INPUT key and select the input signal again.
Set the signal resolution and frequency of the connected computer so that they are
within the preset signal range.
34* 1,280 × 1,024 SXGA VESA 43 Hz 46.433 86.872 H-pos, V-pos 1,696
35 SGI-5 53.316 50.062 S on G 1,680
36* SXGA VESA 60 Hz 63.974 60.013 H-pos, V-pos 1,696
37 SXGA VESA 75 Hz 79.976 75.025 H-pos, V-pos 1,688
38 SXGA VESA 85 Hz 91.146 85.024 H-pos, V-pos 1,728
39 1,600 × 1,200 UXGA VESA 60 Hz 75.000 60.000
43 480/60P 480/60P
(Double frequency
NTSC)
31.470 60.000 S on G
44 575/50P 575/50P
(Double frequency
PAL)
31.250 50.000 S on G
45 1,080/50I 1,080/50I 28.130 50.000
47 720/60P 720/60P 45.000 60.000
48 720/50P 720/50P 37.500 50.000
50 540/60P 540/60P 33.750 60.000
52 1,400 × 1,050 SXGA+ 63.981 60.020 H-neg, V-neg 1,688
Notes
Memory
No.
Preset signal fH (kHz) fV (Hz) Sync SIZE