Filter
Top Products
12
4 Make color adjustment settings for scanning, as necessary.
1 Touch the [Color] button.
A screen opens so you can make the color adjustment settings.
2 Make the color adjustment settings.
You can make the following settings on this screen.
• You can set whether color adjustment is performed frame by frame or
the same adjustment applied to all the frames. Touch the button on
the upper-right of the screen to switch between [Each frame] and [All
frames].
• When scanning a color negative or positive, you can adjust [C], [M],
and [Y]. Touch [+] for stronger hues or [–] for weaker hues.
• When scanning a monochrome negative, you can adjust [Contrast].
Touch [+] for higher contrast or [–] for lower contrast.
• Touch the [+] button next to [Density] for higher density or [–] for
lower density.
• To cancel all adjustments, touch the [Reset] button.
• Touch the [Apply] button to apply the adjustments on the image list.
3 When you are done, touch the [Apply] button.
The display returns to the image selection screen.