Filter
Top Products
8
Setting the Button Sound
You can activate or deactivate the sound emitted when you touch buttons.
You can set the beep in the Configuration Utility, [Setting – Other] screen. For
details about how access the Configuration Utility, refer to the User’s Guide.
When the setting of the [Beep] button is [ON], a beep is emitted each time you
touch a button. Touching the [Beep] button toggles the setting [ON] and [OFF]
(no beep is emitted when you touch a button).
Note
This setting takes effect when you save the changes, and then exit the
Configuration Utility.
Adding and Deleting Templates for
Collage Prints
You can add and delete templates used for collage prints, as necessary.
You can add or delete templates in the Configuration Utility, [Setting – Menu –
Collage] screen. For details about how access the Configuration Utility, refer to
the User’s Guide.
Adding Templates
Touch the [Install] button to display the screen where you can add collage print
templates. For more details about how to perform this operation, contact the
store where you purchased this system.
Deleting Templates
You can delete templates of each size. On the [Setting – Menu – Collage]
screen, touch a size button: [3.5×5], [4×6], [5×7], or [8×10/8×12]. The setting
screen corresponding to the button that you touched is displayed.
Touch the [Delete] button to display the screen where you can delete collage
print templates. Touch the [Delete] button to select it, and then touch the [OK]
button. If you want to clear the selection, touch the [Delete] button again.
Note
• If you delete a preinstalled system template, you cannot restore the template.
• Seven templates are displayed on the screen. If you do not see the template
that you want to delete, touch the [More] button to go to the next screen.
• When you touch the [8×10/8×12] button, the template set in “Changing the
Print Size of the UP-D70A Printer” of this addendum is deleted.
Setting the Screensaver for the Initial
and Printing Screens
You can set the data interval after which the screensaver for the initial or
printing screen appears. Still images or movies can be selected as the
screensaver for the initial screen, but only still images can be selected as the
screensaver for the printing screen.
You can set the screensaver in the Configuration Utility, [Setting – Other –
ScreenSaver] screen. For details about how access the Configuration Utility,
refer to the User’s Guide.
Note
• You can use the following file formats for the screensavers: *.bmp for still
images, *.avi or *.mpg (MPEG-1 format only) file formats for movies.
• Up to four files can be selected for the initial screensaver and the print
screensaver.
• Still image files used by screensavers should be 800 × 600 pixels, while movie
files should be 800 × 600 pixels or less. The file names should be [Startup1.*]
to [Startup4.*] for the initial screen screensaver and [Printing1.*] to
[Printing4.*] for the printing screen screensaver (where the asterisk (*)
represents the bmp, avi, or mpg file extension). They should be saved in the
root directory of a “Memory Stick”. The files can be installed from the
“Memory Stick”.