Filter
Top Products
24
The range to move the picture projected on the screen can be adjusted only within the octagon area
illustrated below. In this connection, see “Positioning the Projector and a Screen” (1 page 16) as
well.
To adjust the tilt of the installation surface
If the projector is installed on an uneven surface, use the front feet (adjustable) to keep the
projector level.
• Pointing the projector at too high or too low of a tilt will result in trapezoidal distortion in the
projected image.
• Be careful not to catch your finger when turning the front feet (adjustable).
Lens Focus adjustment window (test pattern)
Note
Notes
Range of movement of
the projected picture
Projected Picture
H: Width of the projected picture
V: Height of the projected picture
Front feet (adjustable)
Turn to adjust.