Filter
Top Products
Source Technologies, LLC ST9620 Secure MICR Printer User’s Guide
58
Error Message
on Display
Printed
Message
Description Action
Can’t Sort
Insufficient
Memory
This error indicates the
printer does not have
sufficient memory to
sort the Audit Report.
Press Go. The printer
may need to be upgraded
with more RAM memory
to sort; otherwise an
unsorted Audit Report
may be printed.
Command
Decode Error
Decode error
&%Sx (where
x is the
incorrect
character)
A syntax error was
detected in a MICR
command.
Check your software for a
syntax error in the MICR
command that was being
used when the error
occurred.
File System
Error Can’t Open
File
There was an internal
error while trying to
access flash for audit
trail
Check that Flash is
installed and not full.
Flash Full Purge
and Format
This error message
indicates that the
printer’s flash memory
is full. The audit trail
cannot accept more
jobs until more space is
available in flash.
Press Go then purge the
audit trail. Then either
defragment or format flash
memory (Utilities Menu).
Integer string
incorrect length
Integer string
incorrect
length
A parameter in a
command was not the
correct length.
Check the Command
(&%STP, STS) for
syntax/numbering errors.
Invalid
AES/DES key
Invalid hex digit or
length of decryption
key
Check the syntax of
SETAESKEY or
SETDESKEY command.
Invalid Convert
to Escape
Character
Invalid
Convert to
Escape
Character
An error was detected
in the User
Programmable Escape
Character Selection
Command. The
software tried to
specify a NULL or an
ampersand as the first
Escape Character.
Check the Command
(&%STY...) for errors.
Macro Definition
Error
Invalid
decode mode
specified
The Load Flash
Resource Command
contained an invalid
character specifying
the format of the file.
Must be either a D or
S.
Check the Command
(&%STL...) for syntax
errors.
Error Messages | 9