Source Technologies ST9335 Printer User Manual


 
Secure MICR Printer User’s Guide © Source Technologies
July 2003 Page 10 All rights reserved
4 Quality Issues
A high quality MICR document can be read by bank reader/sorter equipment many times
with no readability issues and does not result in damage to bank equipment. This quality is
the result of a well designed printer, an originally manufactured MICR toner cartridge and
high quality check stock.
Printer Features
Your Secure MICR Printer is equipped with some features to ensure high quality MICR
documents.
Paper Type
We recommend paper trays with check stock be set to “bond” paper type. The
associated “weight” and “texture” settings should be set to “heavy” and “rough.” See the
base printers User’s Guide. If more than one input tray has check stock and they are
the same stock, set all to “bond” and they will be linked. If different stock is used in
more than one input tray, use “custom” type, “rough” and “heavy” to block Linking.
MICR Toner Low Alarm
When MICR toner is low, the printer stops and the user is prompted to load a new
MICR toner cartridge. We do not recommend shaking the cartridge to prolong its
life. Once low toner is sensed, there may not be enough MICR toner left to produce
quality MICR documents.
MICR Toner Sensing
When the printer enters MICR mode and attempts to print a MICR font, it checks to
ensure a MICR toner cartridge is loaded in the printer. If a regular cartridge is present,
an alarm will sound and the user must load a MICR cartridge before their print job will
resume. A message “load MICR Toner” will appear on the Operator’s Panel.
MICR Toner
Use only Source Technologies MICR toner when printing MICR documents. It is specifically
engineered to print quality MICR documents with your printer. The printers’ MICR toner sensor
is designed to work with the Source Technologies MICR toner cartridge to prevent printing
checks with regular toner present. You may choose to use this printer for general office
printing, which is acceptable. If a MICR print job begins and the printer has a regular toner
cartridge present, the printer will stop and prompt the operator to install a MICR toner
cartridge.
Source Technologies does not recommend the use of refilled MICR toner cartridges.
Although refilled cartridges are generally less expensive, they may result in expensive
printer repairs and bank check reject fees due to inferior MICR toner formulation.
Section 4: Quality Issues