Filter
Top Products
Secure MICR Printer User’s Guide © Source Technologies
September 2005
46 All Rights Reserved
9. Error Messages
Your Secure MICR Printer has a set of front panel error messages unique to MICR
applications. These messages appear if there is a MICR related problem. The printer may
also print an error message on the page near where the error occurred. In many cases you
can receive more information about a displayed error by pressing Go to print the job which
caused the error. Then inspect the printed page for a more detailed error message.
Error Message on Display Printed Message Description Action
Can’t Purge, password not
enabled
This error indicates
that MICR mode has
not been enabled.
Press Go. Enter
MICR mode, then re-
attempt the purge.
Can’t Sort Insufficient Memory
This error indicates
the printer does not
have sufficient
memory to sort the
Audit Report.
Press Go. The
printer may need to
be upgraded with
more RAM memory
to sort; otherwise an
unsorted Audit
Report may be
printed.
Command Decode Error
Decode error &%Sx
(where x is the
incorrect character)
A syntax error was
detected in a MICR
command.
Check your software
for a syntax error in
the MICR command
that was being used
when the error
occurred.
Invalid Convert to Escape
Character
Invalid Convert to
Escape Character
An error was
detected in the User
Programmable
Escape Character
Selection
Command. The
software tried to
specify a NULL or
an ampersand as
the first Escape
Character.
Check the Command
(&%STY...) for errors.
Flash Full Purge and Format This error message
indicates that the
printer’s flash
memory is full. The
audit trail cannot
accept more jobs
until more space is
available in flash.
Press Go then purge
the audit trail. Then
either defragment or
format flash memory
(Utilities Menu).
Load MICR Toner Before printing a
MICR font, the
printer checks for
MICR toner. If
Replace standard
toner cartridge with a
MICR Toner. Go to
proceed. If MICR