Filter
Top Products
Secure MICR Printer User’s Guide © Source Technologies
September 2005
48 All Rights Reserved
characters.
software, it must be
eight characters long.
MICR Password Error Password Match
Error
Password sent does
not match the
current stored
password.
Check the Password
Command in your
software.
Password Not Enabled Error
A secure command
was sent without the
password being sent
first
Check software to
ensure that password
is sent before any
secure commands
Invalid AES/DES key Invalid hex digit or
length of decryption
key
Check syntax of
SETAESKEY or
SETDESKEY
command
Purge Audit Report, Then
Format
An SFF command
was received, but
there is audit data in
flash which should
not be erased
Purge the audit data,
then resend the SFF
command
File System Error Can’t Open
File
There was an
internal error while
trying to access
flash for audit trail
Check that Flash is
installed and not full
Can’t Create Node There was
insufficient memory
to track another
audit job
Turn printer off and
back on, then retry. If
the problem recurs,
call Tech Support
Secure File Not
Unlocked/Opened/Written/Read
There was an
internal error while
trying to access
Flash for an STL or
STP command
Print the menus to
ensure that Flash is
installed. Print a
directory of Flash to
ensure that is it not
write protected or full.
If error occurs on
STP command,
check to confirm that
the resource is stored
in Flash.