Filter
Top Products
Secure MICR Printer User’s Guide © Source Technologies
September 2005
A8 All Rights Reserved
Appendix E: MICR Mode Command Summary
Description Command Structure Function
Password &%STFPASSWORD$ Must be sent to enable
&%STHPASSWORD$ MICR Mode
MICR Definition &%SMCPxxxx$ MICR Line Count command
Set New Password &%STExxxxxxxx$ Sets new password, must be
preceded by current password
Activate/Set Front Panel &%STSxxxxxxxxx$ Turns on and sets Front Panel
Combination Combination Lock, must be 8 integers
Print MICR E13B Font &%SMDddd...ddd$ Prints E13-B MICR Font at the current
print position, see Appendix A
Print MICR CMC7 &%SM7ddd...ddd$ Prints CMC-7 MICR font at the current
print position, see Appendix B
Print Secure Numeric Font &%SMFddd...ddd~ Prints the Secure Numeric Font at the
current print position Note: The tilde is
the command terminator, see
Appendix C
Print ICR Secure Numeric Font &%SMIxxxxxx~ Prints the ICR Secure Numeric Font at
the current print position, see
Appendix D
Print in MicroPrint &%SMMxxxxxx$ Prints data in MicroPrint font.
Load Flash Resource &%STLxxxxxyyyyyyzddd...dd$ Loads a Flash Resource file into
password protected Flash Memory
Format Flash Memory &%SFF$ Formats Flash Memory Caution: All
flash contents will be lost
Flash Resource Unlock &%STPxxxxx$ Makes Flash Resource Command
available to be called, must be 5
integers
Tray Lock Command &%STTL#$ Locks Tray 1, 2 or 3 for MICR printing
Unlock Tray Command &%STTU#$ Locks Tray 1, 2, or 3