Filter
Top Products
Hardware Installation
SY-P4X400 DRAGON Ultra
26
3. Cooling Fan Installation
(1) CPU Cooling Fan (CPUFAN1, CPUFAN2)
After you have seated the CPU properly on the processor, attach the 3-pin
fan cable to the CPUFAN connector on the Motherboard. The fan will stop
when the system enters into Suspend Mode. (Suspend mode can be enabled
from the BIOS Setup Utility, [POWER MANAGEMENT] menu.)
To avoid damage to the system, install according to the following pin
assignment:
CPU Cooling Fan
(CPUFAN1, CPUFAN2)
CPUFAN Pin Assignment
TAC
NC
12V
12V
CPUFAN1
CPUFAN2
GND
GND
1
1
3
3
2
2