SOYO P4X400 Computer Hardware User Manual


 
Hardware Installation
SY-P4X400 DRAGON Ultra
36
enter the Award BIOS Setup program. The CMOS SETUP UTILITY
will be shown on the screen. Then, follow these steps to configure
the CPU settings.
Step 1. Select [STANDARD CMOS FEATURE]
Set [Date/Time] and [Floppy drive type], then set [Hard Disk Type] to
“Auto”.
Step 2. Select [LOAD OPTIMIZED DEFAULTS]
Select the “LOAD OPTIMIZED DEFAULTS” menu and type “Y” at the
prompt to load the BIOS optimal setup.
Step 3. Select [SOYO COMBO FEATURE]
Move the cursor to the [CPU Frequency Select], [CPU Ratio] field to set
CPU Clock/Ratio.
Note:
Set the
[CPU Frequency Select]
field to “Manual”, to be able to
change the CPU frequency 1 MHz stepping..
Step 4. Select [SAVE & EXIT SETUP]
Press <Enter> to save the new configuration to the CMOS memory, and
continue the boot sequence.
You are now ready to configure your system with the BIOS setup program.
Go to Chapter 3: BIOS SETUP