SOYO P4X400 Computer Hardware User Manual


 
BIOS Setup Utility
SY-P4X400 DRAGON Lite
68
IRQ/Event Activity Detect
Setting Description Note
Hot key Default
PS2KB Wakeup
Select
Password
You can boot-up your system by PS/2 K/B
VIA hotkey or password.
Disabled Default
Ctrl+F1 ~ F12
Power
Wake
PS2KB Wakeup
from S3/S4/S5
Any Key
You can set the following hotkey :
1. Disable
2. Choose CTRL+F1 up to F12
3. The power key in the K/B. (if available)
4. The wake-up key in the K/B. (if available)
5. Any key in the K/B.
ON VGA
OFF
When On of VGA, any activity from one of
the listed system peripheral devices or IRQs
wakes up the system.
Default
LPT/COM Default
NONE,
LPT,
COM
When On of LPT & COM, any activity from
one of the listed system peripheral devices or
IRQs wakes up the system.
LPT & COM
OFF HDD & FDD
ON
When On of HDD & FDD, any activity from
one of the listed system peripheral devices
wakes up the system.
Default
OFF Default PCI Master
ON
When On of PCI Master, any activity from
one of the listed system peripheral devices
wakes up the system
Disabled Default PowerOn by PCI
Card
Enabled
If enabled any PCI interrupt will wake up the
system.
Disabled Default Wake Up On
LAN/Ring
Enabled
An input signal on the serial Ring Indicator
(RI) line (in other words, an incoming call
on the modem/LAN) awakens the system
from a soft off state.
Disabled The system ignores the alarm. Default RTC Alarm
Resume
Enabled Set alarm to power on the system by the date
(1-31) or time (hh:mm:ss). If the date is set
to [0], the system will self-power on by
alarm everyday at the set time.