SOYO P4X400 Computer Hardware User Manual


 
BIOS Setup Utility
SY-P4X400 DRAGON Lite
40
3-1 SOYO COMBO SETUP
This Motherboard does not use any hardware jumpers to set the CPU
frequency. Instead, CPU settings are software configurable with the BIOS
[SOYO COMBO SETUP].
After the hardware installation is complete, turn the power switch on, then
press the <DEL> key during the system diagnostic checks to enter the
Award BIOS Setup program. The CMOS SETUP UTILITY will display on
screen. Then, select the [SOYO COMBO SETUP] option from the main
menu and press the <Enter> key.
CMOS Setup Utility – Copyright ( C ) 1984-2002 Award Software
SOYO COMBO Feature
System Performance Normal Item Help
Frequency 1MHz Stepping 100 MHz
CPU Ratio Select 8X
DRAM Clock
By SPD
Auto Detect PCI/Dimm Clk Disabled
Spread Spectrum Disabled
CPU Vcore Select Default
AGP(1.5) Voltage Select Default
DDR(2.5) Voltage Select Default
Advance Tune-Up Settings
Press Enter
Onboard 6Ch H/W Audio Enabled
Onboard (10/100) Lan Enabled
Quick Power On Self Test Enabled
First Boot Device Floppy
Second Boot Device HDD-0
Third Boot Device LS120
Boot Other Device Enabled
Menu Level
 Move
Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7: Optimized Defaults
The [SOYO COMBO SETUP] menu combines the main parameters that
you need to configure, all in one menu, for a quick setup in BIOS.