Filter
Top Products
Motherboard Description SY-6IWM
16
When suggested ratings for temperature, fan speed, or voltage are exceeded, an
interrupt is activated. The hardware monitor component connects to the SMBus.
1-11 WAKE ON LAN TECHNOLOGY
Wake on LAN technology enables remote wakeup of the computer through a
network. Wake on LAN technology requires a PCI add-in network interface card
(NIC) with remote wakeup capabilities. The remote wakeup connector on the NIC
must be connected to the onboard Wake on LAN technology connector. The NIC
monitors network traffic at the MII interface; upon detecting a Magic Packet, the
NIC asserts a wakeup signal that powers up the computer. To access this feature
uses the Wake on LAN technology connector.
*
CAUTION
For Wake on LAN, the 5-V standby line for the power supply must be capable of
delivering +5V ±5 % at 720 mA. Failure to provide adequate standby current when
implementing Wake on LAN can damage the power supply.