BIOS Setup Utility SY-6IWM
74
Power Management Controls (Continued)
Power
Management
Controls
Setting Description Note
Disabled Default
HDD Power
Down
1-15Min When the set time has elapsed,
BIOS sends a command to the
HDD to power down. This turns
off the HDD motor.
Some older model
HDDs may not
support this
advanced function.
87.5%
75.0%
62.5% Default
50.0%
37.5%
CPU Thermal-
Throttling
25.0%
This item sets the proportion of
the original clock frequency to
which the CPU will slow do in
suspend mode.
3-6.2 Reload Global Timer Events
Power Down &
Resume
Events
Setting Description Note
Disabled Default
IDE0, IDE1
Ø Primary
Ø Secondary
Enabled Enables the PM timers when [No
Activity Event] is detected.
Disabled Default
FDD, COM,
LPT Port
Enabled Enables the PM timers when [No
Activity Event] is detected.
Disabled
PCI PIRQ [A-
D]#
Enabled The system monitors these elements
for activity. The system will resume if
[IRQ activity] is detected.
Default