Filter
Top Products
BIOS Setup Utility SY-6IWM
55
3-1.1 Quick CPU Frequency Setup
Quick CPU
Frequency Setup
Setting Description Note
Default 129/43 MHz
66/33 MHz 133/44 MHz
68/34 MHz 138/46MHz
75/37 MHz 140/46 MHz
100/33 MHz 133/33 MHz
112/37 MHz 140/35 MHz
117/39 MHz 150/50 MHz
CPU Host/PCI
Clock
124/41 MHz 150/37 MHz
Select the host clock of your Slot 1
processor among these values.
Note: For the 810 chipset, 66 and
100 MHz host clock frequencies
are acceptable. However, the
system stability is not guaranteed
for other frequencies due to the
limitations of this chipset.
CPU Ratio
After you have selected the host clock, choose the right multiplier for
the CPU. Options are: [2, 2.5, 3., 3.5, 4, 4.5, 5, 5.5,6,6.5,7.0,7.5,8.0].
The CPU frequency is then defined as [host clock freq.]x[multiplier],
and should the working frequency of your Pentium
®
III, Pentium
®
II &
Celeron processor.
3-1.2 Memory Buffer Strength
Setting Description Note
1x / 1x
Default
4x / 4x 2x / 4x
4x / 3x 2x / 3x
4x / 2x 2x / 2x
4x / 1x 2x / 1x
3x / 4x 1x / 4x
3x / 3x 1x / 3x
3x / 2x 1x / 2x
SMAA [7:4] /
SMAB [7:4]
3x / 1x 1x / 1x
This item sets the strength of
the buffer that drives the
address section of the memory
bus. Change the setting only if
you are an experienced user.
3-1.3 L2 Cache Memory
Setting Description Note
Def 08 Default
CPU L2 Latency
Adjust
Set 01 ~
Set 15
The speed of the L2 cache that is
integrated into the CPU can be set
through this item. Do not change this
item unless ;you are an experienced
user.
Disabled
CPU L2 Cache
ECC Checking
Enabled
This option activates the CPU L2 cache
ECC checking function.
Default