Filter
Top Products
Hardware Installation SY-6IWM
20
2-3.1 CPU Installation
Your SY-6IWM motherboard comes with a CPU retention set kit. The retention set
is used to hold the processor attached to the Slot 1 CPU connector on the
motherboard.
Mark your CPU Frequency:
Record the working frequency
of your CPU that should be clearly marked on the CPU cover.
FSB 66MHz
266MHz (66 x 4.0) 333MHz (66 x 5.0) 400MHz (66 x 6.0)
300MHz (66 x 4.5) 366MHz (66 x 5.5) 433MHz (66 x 6.5)
FSB 100MHz
350MHz (100 x 3. 5) 450MHz (100 x 4.5) 550MHz (100 x 5.5)
400MHz (100 x 4.0) 500MHz (100 x 5.0) 600MHz (100 x 6.0)
FSB 133MHz
400MHz (133 x 3.0) 533MHz (133 x 4.0) 667MHz (133 x 5.0)
466MHz (133 x 3.5) 600MHz (133 x 4.5) 733MHz (133 x 5.5)
Follow these instructions to install your Slot 1 processor correctly.
Ø Retention Module