Filter
Top Products
SOYO SY-P4VM800 Quick Start Guide
2.6 Clearing CMOS (JP5)
In the case of CMOS being wrongly configured that results in boot-up errors or hardware/software
malfunction, follow the procedures below to clear the CMOS to restore default settings.
1. Short Pin 2-3 of JP5 jumper as indicated below.
2. Place the jumper cap back on pin 1-2 to return to default settings.
3 2 1
JP
5
Clear CMOS Short Circuit Open
JP5
Short Pin 2-3 for 5 seconds
to clear the CMOS
Short Pin 1-2 to
retain new settings
Note: The power cord must be detached from the ATX power supply or electric socket before
performing the Clearing CMOS operation.
123
123
15