Filter
Top Products
SOYO SY-P4VM800 Quick Start Guide
2. Install the latest VGA driver from your graphic card manufacturer.
16. After waking up from Suspend to RAM or Standby mode, the screen has no
display, but I can hear the hard disk operating.
1. Ensure your VGA card support Suspend to RAM function.
2. Visit the website of your VGA card manufacturer for a driver update or troubleshooting.
Audio Issues
17. How can I disable the onboard Audio?
The onboard audio can be disabled in BIOS.
18. The onboard audio doesn’t work at all on my system.
1. Ensure the speaker are connected to the Line-out audio jack and powered on.
The SOYO CD
2. Ensure the “Onboard Audio” item is set to “Enabled” in the BIOS menu.
3. Install the audio driver from SOYO CD again or get the latest one from our website.
19. The sound system works fine in my system except for playing CD music in the
CD-ROM, when there is no sound at all.
This may result from the loose or even no connection between the CD-ROM and the onboard
CD1 connector. Ensure a 4-wire audio cable firmly connects the CD-ROM and onboard CD1
connector and try again.
20. The sound and everything else works fine except that the device connected to
Line-in and/or Microphone doesn’t work. What is wrong?
1. Please go to sound driver utility and check if the line-in and/or microphone are enabled.
2. Check if the device connected to Microphone/Line-in is ok.
21. The added PCI sound Card does not work properly.
1. Enter SOYO COMBO Setup menu in BIOS and disable “Onboard Audio” item.
2. Go to “Integrated Peripherals” in BIOS and disable “Game port address” and “Midi port
address” items.
35