Filter
Top Products
SOYO SY-P4VM800 Quick Start Guide
3.3 The BIOS Navigation Keys
Name of Keys Function
Esc Exits the current menu
←→↑↓
Scrolls through the items on a menu
+/–, Page Up/Page Down Modifies the values of a selected item
F10 Saves the current configuration and exits setup
F1 Displays a screen that describes all key functions
F5 Loads previously saved values to CMOS
Shift + F2 Change CMOS menu colors
3.4 Standard CMOS Setup Menu
This page displays a table of items defining basic information about your system.
CMOS SETUP UTILITY – Copyright (C) 1985-2003, American Megatrends, Inc.
Standard CMOS Setup
Help Item
System Time 23:40:15
System Date Sun 05/09/2004
Primary IDE Master Hard Disk
Primary IDE Slave Not Detected
Secondary IDE Master Not Detected
Secondary IDE Slave CD/DVD ROM
Floppy A 1.44 MB 31/2”
Floppy B Disabled
Use [Enter], [TAB] or
[SHIFT-TAB] to select a
field.
Use [+] or [-] to configure
system Time.
↑↓←→ : Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Optimized Defaults
The SOYO CD
Date & Time
These items set up system date and time.
IDE Pri Master
Pri Slave
Sec Master
Sec Slave
These items configure devices connected to the Primary and
Secondary IDE channels. To configure an IDE hard disk
drive, choose Auto. If the Auto setting fails to find a hard disk
drive, set it to User, and then fill in the hard disk characteristics
(Size, Cyls, etc.) manually. If you have a CD-ROM drive,
select the setting CDROM. If you have an ATAPI device with
removable media
(
e.
g
. a ZIP drive or an LS
-
120
)
, select
19