Filter
Top Products
SOYO SY-P4VM800 Quick Start Guide
Suspend mode This item selects the status S1(Stop Clock) when the
system enters the power-saving Suspend mode.
Suspend Time Out
This item sets up the timeout for Suspend mode in minutes.
If the time selected passes without any system activity, the
computer will enter power-saving Suspend mode.
Resume On RTC
Alarm
The system can be turned off with a software command. If
you enable this item, the system can automatically resume
at a fixed time based on the system’s RTC (realtime clock).
Use the items below this one to set the date and time of the
wake-up alarm. You must use an ATX power supply in order
to use this feature.
LAN/Ring Power On The system can be turned off with a software command. If
you enable this item, the system can automatically resume if
there is an incoming call on the Modem/Ring, or traffic on
the network adapter. You must use an ATX power supply in
order to use this feature.
Keyboard Power On
Wake-Up Key
If you enable this item, system can automatically resume
by pressing any keys, hot or power key on the keyboard or
typing in the password. You must enable the Keyboard
Power On jumper and use an ATX power supply in order to
use this feature.
3.8 PCI / Plug & Play Setup Page
The SOYO CD
This page sets up some parameters for devices installed on the PCI bus and devices that use the
system plug and play capability.
CMOS SETUP UTILITY – Copyright (C) 1985-2003, American Megatrends, Inc.
PCI / Plug and Play Setup
Help Item Primary Graphics Adapter PCI
Share Memory Size 32MB
Allocate IRQ to PCI VGA Yes
PCI IDE BusMaster Disabled
Options
PCI
AGP
↑↓←→ : Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Optimized Defaults
Primary Graphics
Adapter
This item indicates if the primary graphics adapter uses the
PCI or the AGP bus. The default PCI setting still lets the
onboard display work and allows the use of a second display
card installed in an AGP slot.
Share Memory Size This item lets you allocate a portion of the main memory for
the onboard VGA display application with three options of
32/16/8MB.
Allocate IRQ to PCI
VGA
If this item is enabled, an IRQ will be assigned to the PCI VGA
graphics system. You set this value to No to free up an IRQ.
PCI IDE Bus Master This item enables or disables the DMA under DOS mode. We
recommend you to leave this item at the default value.
23