Filter
Top Products
SOYO SY-P4VM800 Quick Start Guide
and to assign a port address.
Parallel Port Address Use this item to enable or disable the onboard Parallel port,
and to assign a port address.
Parallel Port Mode Use this item to set the parallel port mode. You can select
SPP (Standard Parallel Port), ECP (Extended Capabilities
Port), EPP (Enhanced Parallel Port), or ECP + EPP.
ECP Mode DMA
Channel
Use this item to assign a DMA channel to the parallel port.
Parallel Port IRQ Use this item to assign IRQ to the parallel port.
Onboard PCI/IDE
Controller
Use this item to enable or disable either or both of the
onboard Primary and Secondary IDE channels.
Onboard SATA-IDE Use this item to enable or disable the onboard IDE channel.
Audio Device This item enables or disables the AC’97 audio chip.
Modem Device This item enables or disables the MC’97 modem chip.
Ethernet Device This item enables or disables the onboard Ethernet LAN.
Onboard USB
Function
Enable this item if you plan to use the USB ports on this
motherboard.
USB Function For
DOS
Enable this item if you plan to use the USB ports on this
motherboard in a DOS environment.
The SOYO CD
3.7 Power Management Setup Page
This page sets some parameters for system power management operation.
CMOS SETUP UTILITY – Copyright (C) 1985-2003, American Megatrends, Inc.
Power Management Setup
Help Item ACPI Aware O/S Yes
Power Management Enabled
Suspend mode S1
Suspend Time Out Disabled
Resume On RTC Alarm Disabled
LAN/Ring Power On Disabled
Keyboard Power On Disabled
Wake-Up Key Any Key
Enable / Disable
ACPI support for Operating System.
Enable: If OS supports ACPI.
Disable: If OS does not support ACPI.
↑↓←→ : Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Optimized Defaults
ACPI Aware O/S This item supports ACPI (Advanced Configuration and
Power management Interface). Use this item to enable or
disable the ACPI feature.
Power Management Use this item to enable or disable a power management
scheme. If you enable power management, you can use the
items below to set the power management operation. Both
APM and ACPI are supported.
22