Filter
Top Products
8
Printer Setup
Connecting to a power outlet and turning power on and off
❏
Plug the power cord of the printer into a standard power outlet whose
voltage matches the power rating noted on the label affixed to the bottom of
your printer.
Caution!
If the voltage marked on the bottom of your printer does not match the voltage
from the outlet you are using, do not plug in the power cord. Contact your
dealer for assistance.
❏
Set the switch on the front of the printer to ON to turn power on, and to
OFF to turn power off.
Caution!
Whenever you turn off the power, wait at least five seconds before turning it
back on; otherwise you may damage the printer.
We recommend that you unplug the printer from the power outlet whenever you
do not plan to use it for long periods. Because of the this, you should locate the
printer so that the power outlet it is plugged into is nearby and easy to access.
At this point you may want to perform a test of the printer to make sure it is
working properly. See page 65 for details on how to perform tests.
ON
I
OFF
O