Filter
Top Products
24 Using the EDS Mode
Selecting a bank
❏
While in the EDS Mode, use the control panel’s FONT button to select a
bank. Indicators on the left side of the control panel light to show which
bank is currently selected.
Selecting a switch
❏
While in the EDS Mode, use the control panel’s MODE button to select a
bank switch. Indicators on the right side of the control panel light to show
which switch is currently selected.
Changing a switch setting
❏
After selecting a bank and switch, press the control panel’s LF button to
turn the switch on and off. The current setting of the switch is indicated by
the ON LINE indicator: the indicator is lit when the switch is on, and is not
lit when the switch is off.
Lit Indicator Selected Bank
ROMAN A
ROMAN + COURIER B
COURIER C
COURIER + ORATOR D
ORATOR E
ROMAN + COURIER + ORATOR F
Lit Indicator Selected Switch
POWER 1
POWER + DRAFT 2
DRAFT 3
DRAFT + QUIET 4
QUIET 5
POWER + DRAFT + QUIET 6