Filter
Top Products
―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications 3-88
ESC RS d n
[Name] Set print density
[Code] ASCII ESC RS d n
Hex. 1B 1E 64 n
Decimal 27 30 100 n
[Defined Area] 0≤
n≤15
48≤
n≤57 (”0”≤n≤”9”)
65≤
n≤70 (”0”≤n≤”F”)
[Initial Value] Memory switch setting
[Function] Sets print density.
This command stops printing to be executed.
When in two-color print mode, this can set the print density of red print.
n Print Density
Single Color Printing Mode Two Color Printing Mode Red Print Density
0, 48 Print density 1.3 Print density 1.2
1, 49 Print density 1.2 Print density 1.2
2, 50 Print density 1.1 Print density 1.0
3, 51 Print density 1.0 Print density 1.0
4, 52 Print density 0.9 Print density 1.0
5, 53 Print density 0.8 Print density 0.8
6, 54 Print density 0.7 Print density 0.8
7, 55 (Reserved) (Reserved)
8, 56 (Reserved) (Reserved)
9, 57 (Reserved) (Reserved)
10, 65 (Reserved) (Reserved)
11, 66 (Reserved) (Reserved)
12, 67 (Reserved) (Reserved)
13, 68 (Reserved) (Reserved)
14, 69 (Reserved) (Reserved)
15, 70 (Reserved) (Reserved)