Filter
Top Products
―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications 3-109
ESC GS / 6 n
[Name] Set partial cut before Auto Logo printing
[Code] ASCII ESC GS / 6 n
Hex. 1b 1d 2f 36 n
Decimal 27 29 47 54 n
[Defined Area] 0 ≤
n ≤ 1
[Initial Value] n = 0
[Function] Sets a partial cut before the Auto Logo printing.
This command is registered to the non-volatile memory by the “<ESC> <GS> / W” command.
This command is ignored when Auto Logo is being executed.
n Setting
0 Does not execute a partial cut before the Auto Logo printing.
1 Executes a partial cut before the Auto Logo printing.
When printing Logo2 and Logo3 as Auto Logo printing like the one in the drawing below, this
command selects to execute a partial cut before printing Logo2 of the Auto Logo and Logo3.
If a partial cut is executed using this function, it is possible to provide coupons, etc., that are printed
using Auto Logo with a partial cut.
***************
MACDONALDS
***************
1.CHEESBUGER $2.00
2.COKE $1.00
----------------------
TO TAL $3.00
********************
MACDONALDS
********************
1.CHEESEBURGER $2.00
2.COKE $1.00
--------------------------------------
TOTAL $3.00
Header
Header
COKE
Cheeseburger
Prints Logo 2
Prints Logo 3
Partial Cut
Partial Cut
Header
********************
MACDONALDS
1. Starts Auto Logo with trigger
of cutting command.
2. Executes user macro 1.
4. Executes user macro 2.
- Executes cut.
- Executes Header logo
printing.
3. Prints Auto Logo