Filter
Top Products
―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications 3-122
ESC GS y P
[Name]
Print QR code
[Code] ASCII ESC GS y P
Hex. 1B 1D 79 50
Decimal 27 29 121 80
[Defined Area] ---
[Initial Value] ---
[Function] Prints bar code data.
When receiving this command, if there is unprinted data in the image buffer, the printer will print the
bar code after printing the unprinted print data.
A margin of more than 4 cells is required around the QR code. The user should ensure that space.
Always check printed bar codes in actual use.
ESC GS y I
[Name]
Get QR code expansion information
[Code] ASCII ESC GS y I
Hex. 1B 1D 79 49
Decimal 27 29 121 73
[Defined Area] ---
[Initial Value] ---
[Function] Sends information on generated image sizes and errors in bar code expansion using the current
settings. Therefore, it is possible to check whether printing is possible prior to actual printing. If
there is an error in the expanded bar code, this command is ignored even if the expand command
(<ESC> <GS> “y” “P”) is sent.
In the even that errors like the ones below occurs, “Error” information is sent to the printer.
• When there is an error in generating a bar code by the combination of bar code setting
commands.
• When the generated bar code data exceeds the printable size
Sending Format: <ESC> <GS> “y” “I” n1 n2
n1 n2 Bar Code Information
0x0000 Error
0x0001 to 0xffff Size around generated bar code (Units: Dots)