Filter
Top Products
―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications 3-112
ESC GS x S 0 n p1 p2
N
ame] Set PDF417 bar code size
[Code] ASCII ESC GS x S 0 n p1 p2
Hex. 1B 1D 78 53 30 n p1 p2
Decimal 27 29 120 83 48 n p1 p2
[Defined Area] n = 0, 1
When n = 0: 1 ≤
p1 ≤ 99, 1 ≤ p2 ≤ 99
When n = 1: p1 = 0 or 3 ≤
p1 ≤ 90, p2 = 0 or 1 ≤ p2 ≤ 30
(However, this excludes p1 = p2 = 0)
[Initial Value] n = 0, p1 = 1, p2 = 2
[Function] Parameter details
n
(Specify Method to Specify Bar Code Size)
p1, p2
(Size Specification)
0 USE_LIMITS
(Specify ratio of bar code
horizontally and vertically)
p1: p2: Proportions of Vertical (p1) and Horizontal (p2)
However, p1: p2 = 1: 99 to 10 : 1 (p1/p2 = 0.01 to 10)
1 USE_FIXED
(Specifies number of lines and
number of columns of bar code.)
p1: Number of lines (0, 3 to 90), p2: Number of columns (0, 1
to 30)
However, p1 * p2 ≤
928
When either p1 or p2 specifies 0, it indicates that that setting
value is variable.
Setting the bar code size using this command specifies the general size of the bar code. The size will automatically be
corrected according to the other settings.
ESC GS x S 1 n
[Name] Set PDF417 ECC (security level)
[Code] ASCII ESC GS x S 1 n
Hex. 1B 1D 78 53 31 n
Decimal 27 29 120 83 49 n
[Defined Area] 0 ≤
n ≤ 8
[Initial Value] n = 1
[Function] Parameter details
• n: ECC level (0 to 8)
ESC GS x S 2 n
[Name] Set PDF417 module X direction size
[Code] ASCII ESC GS x S 2 n
Hex. 1B 1D 78 53 32 n
Decimal 27 29 120 83 50 n
[Defined Area] 1 ≤
n ≤ 10
[Initial Value] n = 2
[Function] Parameter details
• n: Sets the module X direction size (x-dim). Units: Dots
It is recommended that 2 ≤
n when specifying using this command.
When using with n = 1, check by actual use.