Filter
Top Products
– 12 –
ENGLISH
7 Press the FEED (paper feed) switch
to feed the paper approximately
10cm.
8 Insert the tip of the roll paper in the
auto cutter paper slit.
• When using copying paper, insert
only the original (the upper paper)
into the slit of the auto cutter. Insert
the paper which is to be copied (the
lower paper) between the platen and
the auto cutter.
Fig. 4-14
Positioning rib
Cover
Roll paper
Paper roll holder
Paper
insertion
slit
Auto
cutter
Fig. 4-15 Insertion of the paper into
the auto cutter