Filter
Top Products
– 19 –
ENGLISH
6. Control Codes
STAR mode
6-1. Control Codes Used in Character Setting
Control codes Hexadecimal codes Function
<ESC> “R” n 1B 52 n Select international character set. Default is accord-
ing to the dip switch settings 3, 4 and 5.
<ESC> “M” 1B 4D Select 7 × 7 (Half dots) character size (Default
setting)
<ESC> “P” 1B 50 Select 9 × 7 (Half dots) character size
<SO> 0E Select expanded character mode
<SI> 0F Cancel expanded character mode
(Default setting)
<DC4> 14 Cancel expanded character mode
(Default setting)
<ESC> “W” “1” 1B 57 31 Select expanded character mode
<ESC> “W” <1> 1B 57 01
<ESC> “W” “0” 1B 57 30 Cancel expanded character mode
<ESC> “W” <0> 1B 57 00 (Default setting)
6-2. Control Codes Used in Print Mode Setting
Control codes Hexadecimal codes Function
<ESC> “4” 1B 34 Red color print selection (enable for SP216)
<ESC> “5” 1B 35 Red color print deselection (enable for SP216) (De-
fault setting)
<ESC> “E” 1B 45 Emphasized print mode selection
<ESC> “F” 1B 46 Emphasized print mode deselection (Default set-
ting)
6-3. Control Codes Used in Line Spacing
Control codes Hexadecimal codes Function
<LF> 0A Line feed
<CR> 0D Line feed (same as LF)
<ESC> “a” n 1B 61 n Feed paper n lines