Filter
Top Products
7
The following are the factory default values for the WAN port:
IP Address: 192.168.1.123
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.254
Broadcast: 192.168.1.255
To access the Web configuration for this product, you will need to configure
the workstation you are using to the same subnet (255.255.255.0) and
also assign it a valid IP address (i.e. 192.168.1.100). For details on how
to change the IP address of your computer (if necessary), consult your
documentation or System Administrator for assistance.
Please note:
In order to avoid a conflict, it is advisable to verify whether another •
device on your network is using the same IP address as the
SVxx54DX4I before connecting it to the network.
Should an IP address conflict occur with another device on the •
network, power off the conflicting device or assign it another IP address
before continuing the installation.
If you are configuring more than a single SVxx54DX4I unit using the •
factory default settings on the WAN port, they cannot be connected to
the network at the same time, as they will use the same IP address.
Not all IP addresses are valid for a given subnet. If you are required •
to change your subnet (and therefore IP address) to configure the unit,
be sure the IP address you choose is within the allowable range for the
255.255.255.0 subnet.
Once your computer is configured to the same subnet as SVxx54DX4I,
you can use the IP address 192.168.1.123 to access the Web
configuration system.