Filter
Top Products
1
Installation
Package Contents
This package should contain:
1 x CAT5 Multi-user KVM •
1 x Power Cord •
1 x Rack Mounting Hardware •
1 x Instruction Manual•
Required Cables and Hardware
Depending on your needs, you may need one or more of the following
cables. Please note that the corresponding StarTech.com part numbers
are listed in brackets:
All applications:
For connection to a LAN: 1 x Straight-through Ethernet patch cable
(M45PATCHxxxx)
DB9F to RJ45F Adapter (GC98FF, GC98MF)
PS/2 Server Interface Module for Enterprise Series (SV5PS2M)
USB Server Interface Module for Enterprise Series (SV5USBM)
Hardware Installation
To connect the KVM Remote Control Unit to the Host Computer and
Network:
Using a Category 5 Ethernet patch cable, connect the LAN connector 1.
on the rear panel of the SVxx54DX4I to a network data jack (usually
on a hub, switch, router, or pre-wired wall jack).
Connect a standard PS/2 or USB keyboard to the Local Keyboard port 2.
on the rear panel of the SVxx54DX4I.
Connect a standard PS/2 or USB mouse to the Local Mouse port on 3.