Filter
Top Products
46
OSD Function Keys
Please Note: Channel names can only be changed through the web
interface.
Changing Your Configuration
After the initial power up, any device can be moved, added or removed
from any port on the KVM without powering down the switch. The
attached computer must be powered up for it to provide power to the
Server Interface Module, so it will not appear in the OSD list until that
time. It is safe to hot plug USB devices, but PS/2 systems will typically
require a power cycle.
Please Note: After changing your configuration, the OSD will
automatically update to reflect the new configuration.
OSD Keys Function
1 - 9 (0 = 10)
Selects a channel from the list
F1 – F10
View a channel from the list. ( Does not close
OSD)
T
Activate terminal emulator
L
Logout immediately
?
Show help screen
R
Reset server interface module (May be used to
recover from stuck keyboard or mouse emulation)
I
Show TCP/IP status/settings.
S
Change TCP/IP Settings
ESC
Close OSD (No state change)
<Ctrl>+R
Full cold reset of Server Interface Module. Use
the Reset command first
Page Up/Down
Scroll up and down the OSD list
Home/End
View the first and last channel of the KVM