Filter
Top Products
16 Cluster Platform 4500/3 User’s Guide • July 2001
Cabling the System
The Cluster Platform 4500/3 is shipped with the servers, hubs, and each of the
arrays already connected in the cabinet. You should not need to cable the system.
Refer to
FIGURE 2-4 for servicing the cables.
This section describes how the Cluster Platform 4500/3 components are cabled when
shipped from the factory. The integrated platform provides FC-AL cables connected
to the on-board GBICs on the I/O board. Serial cables connect the Ethernet hub to
the management server and 10BASE-T ports on the disk arrays.
For specific cabling connections, refer to Appendix C.
*530-2834isamanufacturingpartnumber.
Caution – Partner pairs are not supported at this time. Do not connect the
partner-pair loop cables.
TABLE 2-4 Cluster Platform Cables
Component Part Number Quantity
SCSI cable 530-2834* 4
DB-25/RJ-45 serial cable 2151A 2
Null Ethernet cable 3837A 2
F100 cable 9715A 6
Serial cable 9524A 1
RJ-45 Ethernet cable 1871A 4