Filter
Top Products
Using the SunFDDI Network Utilities 97
8
Example Neighbor Statistics
The following output was recovered from a single-attached station using the
command shown. A temporary fault condition was simulated by disconnecting
the FDDI cable from the SunFDDI/P card and then reconnecting it.
Note the following observations regarding this example:
• Accumulated statistics are displayed automatically after every tenth
interrogation.
• The combination of PhyS=NONE and the loss of frame activity indicates that
the station is disconnected from the network.
Start pf_stat ---------->
Accumulated statistics ->
Path disconnected ------>
Path re-established ---->
(Lost frames indicated)
Accumulated statistics ->
Finish pf_stat --------->
# <basedir>/pf_stat —m pf0 1 20
PhyS Frame Error Lost SA UNA DNA
M c45d5463 1 1b <mac_addr1> <mac_addr2> <mac_addr3>
M 27437 0 0 <mac_addr1> <mac_addr2> <mac_addr3>
M 27427 0 0 <mac_addr1> <mac_addr2> <mac_addr3>
M 27435 0 0 <mac_addr1> <mac_addr2> <mac_addr3>
NONE 182f1 0 0 <mac_addr1> <mac_addr2> <mac_addr3>
NONE 0 0 0 <mac_addr1> <mac_addr2> <mac_addr3>
NONE 0 0 0 <mac_addr1> <mac_addr2> <mac_addr3>
Md43207<mac_addr1> <mac_addr2> <mac_addr3>
M 2707e 0 0 <mac_addr1> <mac_addr2> <mac_addr3>
PhyS Frame Error Lost SA UNA DNA
M c46e5ce7 1 22 <mac_addr1> <mac_addr2> <mac_addr3>
M 27228 0 0 <mac_addr1> <mac_addr2> <mac_addr3>
M 27230 0 0 <mac_addr1> <mac_addr2> <mac_addr3>
M 27227 0 0 <mac_addr1> <mac_addr2> <mac_addr3>
M 2722e 0 0 <mac_addr1> <mac_addr2> <mac_addr3>
M 2722c 0 0 <mac_addr1> <mac_addr2> <mac_addr3>
M 27228 0 0 <mac_addr1> <mac_addr2> <mac_addr3>
M 27231 0 0 <mac_addr1> <mac_addr2> <mac_addr3>
M 2722b 0 0 <mac_addr1> <mac_addr2> <mac_addr3>
M 27227 0 0 <mac_addr1> <mac_addr2> <mac_addr3>