Filter
Top Products
TABLE38 Connectivity Map -Communication Control (V3)
Name Description
Time ToWait For A
Response
The amount oftime (in milliseconds) that the adapterwaits for a response from
the external system before taking recourse action (see Action on No Response in
HL7 Recourse Action). Anydata from the external system isconsidered a
response.
This property correspondsto the initial read/receive operation timeout.Once a
response is received,the subsequent read/receive operation uses thevalue
specied for SoTimeout (see
TCPIP InboundSettings). A value of 0 (zero)
indicates an innitetimeout.
Max EmptyRead Retry Themaximum number oftimes the adapter attempts toread data from the
external system afterthe read/receive operation returns nothing. Thisapplies to
the read or receive operation after a response starts to arrive. Empty Read means
that a timeoutoccurs on the read/receive operation, whichuses the SoTimeout
parameter in theTCPIP Server Base Settings section as thetimeout setting (see
TCPIP InboundSettings). The corresponding recourse action isspecied by the
Action on Max Failed Read Retry (see
HL7 Recourse Action).
Max NoResponse The maximum number of responsetimeouts the adapter allows whilewaiting for
data from the external system before taking recourse action (see ActiononMax
No Response in
HL7 Recourse Action).
This property isused in the inbound Collaboration code.
Max NAK Receive Retry Themaximum number of negative acknowledgments(NAKs) theadapter
receives before taking recourse action (see Action on Max Nak Received in
HL7
Recourse Action
).
This property isused for the inbound Collaboration code.
Max NAK Send Retry Themaximum number of negative acknowledgments (NAKs)the adapter sends
before taking recourse action (see Action on Max Nak Sent in
HL7 Recourse
Action
).
This property isused in the inbound Collaboration code.
Max CannedNAKSend
Retry
The maximum numberof canned negative acknowledgments that theadapter
sends before taking recourse action (see Action on Max Nak Sent in
HL7
Recourse Action
). A valueof 0 (zero) indicates that theadapter will not attempt to
create or senda canned NAK.
Enable Journaling An indicator ofwhether message journaling is enabled. Toenable message
journaling, select true; otherwiseselect false.
This property isused for inbound Collaboration code.
TCP/IPHL7V3AdapterInboundConnectivity MapProperties
SunAdapterforTCP/IPHL7User's Guide • October200976